Frequently Asked Questions


Please find our most commonly asked questions and answers below. If you can’t find the answer to your question, please contact us by email: info@airlok.com.au

AirLok Car Cover

The AirLok Car Cave does not eliminate humidity it eliminates condensation. The fan exchanges the air by volume 3-4 times an hour. This constant air change and air flow does not allow hot air and cold masses to meet. This in turn eliminates condensation and keeps the vehicle completely dry no matter what the temperature or humidity level.
The AirLok Car Cave is an evaporative system. The constant air change will evaporate all moisture in a matter of hours. This will prevent rust from the exterior parts while eliminating mold and mildew from the interior.
You should leave the windows either down all the way or at least half the way down. If you have a convertible the top should be put up so that it will not trap moisture in the compartment it is stored in.
This will let the air circulate throughout the interior keeping it dry and odor free.
Once inflated the AirLok Car Cave takes up about 300mm on either side of the vehicle. The front and back depend on what size AirLok Car Cave is used.
The AirLok Car Cave has 2 zippers that run around the base mat to the back where the fan is located. Just unzip and roll the upper shroud towards the fan. Pull the vehicle on to the base mat and roll the upper shroud over the vehicle. Zip up the unit and plug in the fan. The AirLok Car Cave takes about 5-10 minutes to inflate.
The cover will deflate and turn into a regular car cover. When the power returns it will re-inflate in a matter of minutes.
You do not need to use another cover with the AirLok Car Cave. This will only block air from circulating in the interior and might trap moisture.
The AirLok Car Cave can be used for short-term, long-term or anything in between. It takes about the same time to use as a regular car cover except for the inflating of the unit. It takes about a couple of minutes to get the car out.
No, the base mat is impervious to gas, diesel, oil or antifreeze. You do not have to worry about these odors because the air is constantly changing.
No, dry packs or chemicals are not needed. This is an evaporative system that uses air flow to prevent condensation. This enables you to take your vehicle in and out anytime you want without having to mess with chemicals or dry packs.
We have not had a problem with any kind of critters chewing through the material. Our cars look as good now as it did when we first put them in the AirLok Car Cave.
The prototypes were built in 2005 and are still in use today.
Approx. $16.00 a month.
Yes our factory can produce any custom size
The lower section and roof area are made from heavy duty oxford nylon and is impervious to oil, petrol, etc. Although we do recommend a sheet of plastic or drip tray under the vehicle if it leaks oil etc.
All units operate on 240V AC .

AirLok Bike Bubble

The AirLok Bike Bubble does not eliminate humidity it eliminates condensation. The fan exchanges the air by volume 3-4 times an hour. This constant air change and air flow does not allow hot air and cold masses to meet. This in turn eliminates condensation and keeps the motorcycle completely dry no matter what the temperature or humidity level.
The AirLok Bike Bubble is an evaporative system. The constant air change will evaporate all moisture in a matter of hours. This will prevent rust from the exterior parts
The AirLok Bike Bubble has 2 zippers that run around the base mat to the back where the fan is located. Just unzip and roll the upper shroud towards the fan. Push the motorcycle onto the base mat and roll the upper shroud over the motorcycle. Zip up the unit and plug in the fan. The AirLok Bike Bubble takes about 5-10 minutes to inflate.
The cover will deflate and turn into a regular motorcycle cover. When the power returns it will re-inflate in a matter of minutes.
The AirLok Bike Bubble can be used for short-term, long-term or anything in between. It takes about the same time to use as a regular motorcycle cover except for the inflating of the unit. It takes about a couple of minutes to get the motorcycle out.
No, the base mat is impervious to gas, diesel, oil or antifreeze. motorcycle You do not have to worry about these odors because the air is constantly changing.
We have not had a problem with any kind of critters chewing through the material. Our motorcycles look as good now as it did when we first put them in the AirLok Bike Bubble.
The prototypes were built in 2005 and are still in use today.
Approx. $16.00 a month.
The lower section and roof area are made from heavy duty oxford nylon and is impervious to oil, petrol, etc. Although we do recommend a sheet of plastic or drip tray under the motorcycle if it leaks oil etc.
All units operate on 240V AC .